Lost your White Card? Click here to get a replacement. It's quick and easy!

Date PostedAugust 14, 2012

White Card Update: How to Avoid Eye Injury for Construction Workers

The very nature of the construction industry and the various hazards that it presents make workers vulnerable to a number of injuries, including eye injuries. Eye injuries are one of the most common workplace injuries reported by construction workers because of the heavy machinery and tools involved. Construction work exposes workers to a wide variety of hazardous materials, many of which are airborne such as saw dust, sand, metal shavings, paint, stone dust, chemicals, dirt, nails, toxic chemicals and radiation.

According to recent studies most workers who reported eye injuries were not wearing personal protective eyewear at the time. Some workers using safety glasses were still injured because the glasses were not sufficient protection for the task undertaken.

Not only should employers provide workers with the appropriate Personal protective equipment for the job to be done safely, but they should also provide a wash station where eyes can be washed whenever necessary.

The best protective eye wear is the kind that protects the entire eye and has shields which reduce the gaps. These prevent dust particles and other foreign objects from flying into the eye area and damaging or irritating the eye because they have side shields which minimise the gaps.

Concrete coring and welding are just two of the many construction activities that necessitate the use of these safety glasses. Safety glasses with side shields usually have vents to prevent fogging and hampering vision. Workers who wear contact lenses need not use ventilated protective glasses and workers wearing prescription glasses should use the appropriate safety glasses that fit over their prescription glasses.

Although safety glasses are usually manufactured using the highest standards, its best to use safety glasses made from industrial strength materials that do not buckle under routine hazardous worksite conditions.

What are Workers Responsibilities?

While employers are responsible for providing the appropriate eye gear free of charge should the job require it, workers have a responsibility to ensure the health and safety of themselves including their eyes. Workers must wear the eye gear whenever engaging in eye threatening activities. Employers must train workers on PPE and ensure they are well maintained and clean

Construction workers must use protective eye gear every time they are actively involved in a construction related task and the appropriate eye protection for the task should be utilised. Most eye injuries occur when workers least expect it and are not wearing the necessary protective eye covers.

Ensuring that PPE is well maintained and protective eye gear is kept in excellent condition is also the workers’ responsibility, but should the PPE become damaged it should immediately be reported.

Guidelines on What Protective Eyewear to Wear

  • Workers should always wear goggles or safety glasses that have side shields fitted, not ones that leave the sides open, exposing parts of the eye area.
  • If you use contact lenses, wear unvented goggles.
  • The following circumstances warrant and in fact require the use of safety eye goggles:

When there is a lot of dust, liquids, gases and when engaging in overhead work.

  • Also wear a clear, plastic face shield for:

Work with corrosive chemicals or metals that can splash into the eye, grinding, chipping, or using a wire brush on welds, work involving flying particles, sandblasting work.  

What to do in an Eye Emergency:

Hopefully it will not get to this, but should you find yourself with an eye injury first seek medical attention especially if the eye is sore, blurry or if you have lost vision. When waiting for medical help to arrive your first aid officer can assist or you can attempt to the following steps

If you get particles in your eye:

•Avoid rubbing the eye

•Your eye will naturally secrete tears, try to let these tears wash the dust out or irrigate the eye with an artificial tear solution or water.

•Attempt to lift the upper eyelid outward and down over the lower eyelid to remove the dust speck.

•If the particle does not wash out, keep the eye closed and seek medical care.

If you suffer a blow directly to the eye

•Apply a cold compress without putting pressure on the eye. A cold compress can be made by putting crushed ice in a bag.  

•In cases of severe pain or reduced vision, seek immediate medical care.

If you sustain cuts and punctures to the eye or eyelid

•Never wash out the eye as is often our first instinct to do.

•Do not attempt to remove an object that is stuck in the eye.

•Cover the eye with a rigid shield, like the bottom half of a paper cup and seek immediate medical attention.

Chemicals in the eye

•As soon as possible, wash the eye with water for at least 15 minutes. Place the eye under a faucet or shower, use a garden hose, or pour water into the eye from a clean container.

•Remove contact lenses first before flushing out the eye.

•Do not try to neutralize the chemical with other substances or bandage the eye.

•Seek immediate medical attention after flushing.

Posted by Steven Asnicar

 

Steven Asnicar is regarded as a leader across many fields of industry. In particular, his specialisation across the health, infrastructure, construction, resource and utility sectors has seen him successfully change the dynamics of these industries through the introduction of new strategic, marketing, training and technical frameworks. Steven works closely with industry peak bodies such as Safework Australia, Australian Logistics Council, National Advisory for Tertiary Education, Skills and Employment (NATESE) and the Council of Australian Governments in the development of new delivery standards and industry specific programs.

Posted in General Construction Tagged with: , , , ,
X

Urban E-Learning is not registered with CRICOS, therefore cannot offer training to student visa holders; please click here to see the UEL Student Handbook for further information.

¤